Pre-order open — shipping March 2027
1,700 units available. First come, first served.
We have opened pre-orders on the first 3,500 units. Of those, 1,800 are already accounted for in the initial production run, leaving 1,700 available. Units are allocated strictly in the order deposits are received.
$799 per unit secures your allocation · total $2,946 per unit after both discounts
$3,995 retail
$2,946
per unit, all in — 26% below retail
- Deposit, paid now
- $799.00
- Balance at invoicing
- $2,397.00
- Invoice discount
- −$250.00
- Balance actually due
- $2,147.00
- First shipments
- March 2027
Allocation
Where the first 3,500 units are going
First come, first served. Allocation is by deposit date, not by order size or by negotiation. When the 1,700 units are committed, pre-ordering closes and remaining demand moves to the second production run at the then-current price.
Terms
How the pre-order works
Tell us about your valves
Quantity, valve make and model, and the application. We check fit against the current hardware — supply current, spool lap and interface pin assignment — before you pay anything. If your valves fall outside what the unit supports we will tell you at this stage.
Pay the deposit to secure your allocation
$799 per unit, paid up front. This is what reserves your place in the production sequence and locks your pricing. Allocation runs strictly by deposit date, so the deposit is what holds the units — nothing before it does.
We send your pre-order agreement
Once the deposit is received we issue your pre-order agreement setting out unit quantity, the locked pricing, the delivery window, the deposit terms and the refund conditions. Read it carefully — it is the document that governs the order.
Production and invoicing
We keep you informed of production status against the March 2027 schedule, including if it moves. The balance is invoiced before despatch, with a further $250 per unit deducted at that point — so the balance actually due is $2,147 per unit rather than $2,397.
Despatch and commissioning support
Pre-order customers get direct engineering support through installation and the baseline-learning period, and early access to firmware updates as the field programme produces them.
The arithmetic
Two discounts, stacked
The 20% pre-order discount comes off the retail price up front. A further $250 per unit comes off at invoicing. Together they take $1,049 off every unit.
| Stage | Amount |
|---|---|
| Retail price | $3,995.00 |
| Pre-order discount (20%) | −$799.00 |
| Pre-order price | $3,196.00 |
| Deposit, paid now | $799.00 |
| Balance at invoicing | $2,397.00 |
| Invoice discount | −$250.00 |
| Balance actually due | $2,147.00 |
| Total paid per unit | $2,946.00 |
| Total saving per unit | $1,049.00 |
$7,990
Deposit today. Balance $21,470 at invoicing. You save $10,490.
$19,975
Deposit today. Balance $53,675 at invoicing. You save $26,225.
$39,950
Deposit today. Balance $107,350 at invoicing. You save $52,450.
Before you commit
What you should know
The deposit comes before the agreement
Because allocation is strictly first come first served, the deposit is what holds your units. Your pre-order agreement — with the full terms, the delivery window and the refund conditions — follows once payment is received. If you would rather see the terms before paying, ask us and we will send a sample agreement first.
This is a pre-production order
First shipments are scheduled for March 2027. You are reserving units from a production run that has not yet been built, at a discount that reflects that. If you need a committed delivery date against a penalty, this is not the right time to buy and we would rather say so.
Performance figures come from a pilot
Our published detection and lead-time figures come from a 75-day pilot programme on a ten-valve fleet, documented in full on the pilot results page, including the failures the engine could not predict. Field data collection continues.
Check the fit first
The 5 A supply limit, the critically lapped spool assumption for leakage detection and the standard 12-pin interface are real constraints. Send a valve data sheet and we will confirm fit before you commit anything.
Reserve units
Secure your allocation
$799 per unit secures your place in the production sequence. Your pre-order agreement follows once the deposit is received, and a further $250 per unit comes off at invoicing.
You will be asked for quantity, your valve details and payment information on the next step.
Questions first? preorder@canarypvis.com · (208) 277-0877
$799
Per unit, paid up front. This is what secures your allocation.
$2,147
Per unit, after the $250 invoice discount is applied.
1,700
Units available of the 3,500 opened. Allocated by deposit date.
Not ready to order? Send us your valve make and model and we will come back with a fit assessment confirming exactly what CANARY can monitor on it — no commitment. Email engineering or call (208) 277-0877.